SparkN0de-git - /page/commit.mu

Micron Document

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

| SparkN0de-git | SparkN0de |

Node / ReticulumProjects / RNode_Firmware.git / commits / 9174dbd

Commit 9174dbd34a8331100c187f5ec6b7ce77b63ca9d3

󰉖 Browse tree at this commit

Parents : 6c82de1

Author : Mark Qvist <mark@unsigned.io>

Date : 2025-01-03T11:54:48+01:00

Board defines for T3S3-SX1280

Changes

3 files changed, 19 insertions(+), 0 deletions(-)

M Boards.h +12

M Makefile +3

M sx128x.cpp +4

Diff

diff --git a/Boards.h b/Boards.h

index d2b4a6f..95856a7 100644

--- a/Boards.h

+++ b/Boards.h

@@ -46,6 +46,7 @@

#define MODEL_A5 0xA5 // RNode v2.2, 433 MHz with SX1278

#define MODEL_A6 0xA6 // RNode v2.2, 868 MHz with SX1262

#define MODEL_AA 0xAA // RNode v2.2, 868 MHz with SX1276

+ #define MODEL_AB 0xAB // RNode v2.2, 2.4 GHz with SX1280

#define PRODUCT_TBEAM 0xE0 // T-Beam devices

#define BOARD_TBEAM 0x33

@@ -437,6 +438,17 @@

const int pin_busy = 34;

const int pin_dio = 33;

const int pin_tcxo_enable = -1;

+ #elif MODEM == SX1280

+ #define DIO2_AS_RF_SWITCH true

+ #define HAS_BUSY true

+ #define HAS_TCXO true

+ #define HAS_PA true

+ const int pa_max_input = 3;

+ const int pin_busy = 36;

+ const int pin_dio = 9;

+ const int pin_tcxo_enable = -1;

+ const int pin_rxen = -1;

+ const int pin_txen = -1;

#else

const int pin_dio = 9;

#endif

diff --git a/Makefile b/Makefile

index 0d0fb51..f562f8c 100644

--- a/Makefile

+++ b/Makefile

@@ -81,6 +81,9 @@ firmware-t3s3:

firmware-t3s3_sx127x:

arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x01\""

+firmware-t3s3_sx1280:

+ arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x04\""

firmware-tdeck:

diff --git a/sx128x.cpp b/sx128x.cpp

index ecd87a0..402953d 100644

--- a/sx128x.cpp

+++ b/sx128x.cpp

@@ -683,11 +683,15 @@ void sx128x::disableTCXO() {

}

void sx128x::setTxPower(int level, int outputPin) {

+ #if HAS_PA == true

+ if (level > pa_max_input) { level = pa_max_input; }

+ #else

if (level > 13) {

level = 13;

} else if (level < -18) {

level = -18;

}

+ #endif

_txp = level;

──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────